Vortech 2005-2010 Ford 4.6L 3v Mustang GT User Manual

Page 71

Text mode
Original mode

P/N: 4FU020-010 v6.2, 06-08-10

11. COOLANT RESERVOIR RE-INSTALLATION (Non-cooled kits only)

A. Reinstall the factory coolant reservoir using factory hardware to secure.
B. Reattach the large hose at the bottom of the reservoir using the factory hose clamp.
C. Reconnect the small overflow hose at the top using the factory clamps.
D. Check all cooling system hose connections to make sure they are secured with the appropriate

hose clamps.

E. Refill the cooling system using the previously drained coolant.
F.

(2005-2006 Only) Once the coolant system is filled and all trapped air expelled, install the

1/8"NPT plug provided in the previously installed crossover tube. Thread sealant should be used.