Vortech 2005-2010 Ford 4.6L 3v Mustang GT User Manual

Page 70

P/N: 4FU020-010 v6.2, 06-08-10

10. COMPRESSOR BY-PASS VALVE INSTALLATION (Non-cooled kits only)

Assemble the compressor by-pass valve by using

a piece of 1" hose cut 15" long and a piece cut to

4.25" long, and four #16 hose clamps.

Attach the 4.25" piece of hose to the inlet of the

bypass and secure with a #16 clamp.

Secure the 15" piece to the by-pass valve outlet

using a #16 hose clamp. (See Fig.

10-a.)

Attach the open end of the 4.25" hose to the boss

on the air discharge duct. Secure with a #16 hose

clamp. The open end of the 15" long hose will be

connected to the air inlet in a future step.

Secure all hoses with the clamps provided.

Connect the supplied length of 5/32" vacuum to

the port on the bypass valve. Route the line to the

fuel regulator vacuum hose. Using the supplied

vacuum TEE, connect the bypass vacuum line.

(See Figs. 10-a, 10-b, for assistance.)

Fig. 10-b

FUEL REGULATOR

SUPPLIED

VACUUM

TEE

Fig. 10-a

4.25" x 1" HOSE

(TRIM TO FIT)

TO DISCHARGE

TUBE

15" x 1" HOS E

(TRIM TO FIT)

TO MANIFOLD PRESSURE/VACUUM

#16 HOSE CLAMPS

BYPASS

VALV E

TO INLET

DUCT