Pitney Bowes RISO ComColor Printer - Manual (Page 39)

37
Administrator Settings
ComColor Series Administrator’s Guide 02
2 Press [ON].
3 Set each security policy to [ON] or
[OFF].
● You can register up to 10 security policies. You
can also switch the priority using the [ ] and
[ ] buttons.
● Press [OK] if you do not add, delete, or change
the setting of a security policy.
4 Press [Add] to display the
[Security policy] screen.
To change or delete the setting of a registered
security policy, select it and press [Change] or
[Delete].
5 Press the [Basic] tab and
configure each setting.
When you press [Name] or [Pre-shared key], its
setting screen is displayed.
The security policy's name and the pre-shared
key must be entered within 32 alphanumeric
characters.
● The setting varies depending on your network
environment. Scroll using the [ ▲] and [▼]
buttons, and configure each setting.
● If you press [Name], the [Name] screen is
displayed. After entry, press [OK].
● If you press [Pre-shared key], the [Pre-shared
key] screen is displayed. If you press [Next]
after entry, the [Pre-shared key (confirm)]
screen is displayed.
● If you enter a registered security policy name,
the [Confirm] screen is displayed. Follow the
message to enter it again.
6 Press the [IKE] tab and configure
each setting.