Pitney Bowes RISO ComColor Printer - Manual (Page 18)

16
ComColor Series Administrator’s Guide 02
Power save setting
Switch the machine to power save mode when the machine has not been operated for a
fixed period.
The power saving setting has [Auto backlight-OFF] and [Auto sleep]. You can select sleep
from two different levels of power consumption, [Low/Standard].
● If you set the power saving in sleep to [Low], you can save more power than
you can in [Standard]. However, the following limitations apply.
• The RISO Console is not displayed during sleep.
• If you print on a network where wake online does not work, the printer does
not wake up automatically. Specify "MAC address" in the printer driver's
[Environment] tab.
See "Configuring the MAC Address" in the "User's Guide" for details.
• Auto backlight-OFF
The status when the touch panel is off and the [Wake up] key lights up. Load an original
on the scanner, or press the [Wake up] key on the operation panel to restore.
• Auto sleep
The status when the touch panel is off and the [Wake up] key lights up. Press the [Wake
up] key to restore.
• Power consumption (in sleep)
Low/Standard
• Auto backlight-OFF
OFF/ON, Activation time: 1 - 60 min.
(Factory setting: 10 min.)
• Auto sleep
OFF/ON, Activation time: 1 - 60 min.
(Factory setting: 55 min.)
Auto power-OFF setting
Turns off the "Sub power" of the machine automatically when the machine has not been
operated for a fixed period.
• Auto power-OFF
OFF, ON
• Transition time: 1 - 120 min.
(Factory setting: 90 min.)
Auto reset setting
Automatically resets the machine to the default when the machine is not operated for a
fixed period.
• OFF, ON
• Activation time: 1 - 60 min.
(Factory setting: 3 min.)
Cleaning cycle setting
Automatically cleans the ink head after a set number of sheets are printed.
500 - 3000 pages
(Factory setting: 1000)
Displayed language
Specify the language displayed on the touch panel. After the language is set, all displays
are switched to the selected language.
See the operation panel of the machine
for the selectable languages.
Beep sound
Specify whether the beep sound is activated when operating the keys and buttons and
when an error occurs.
• OFF
The beep sound is muted.
• Limited
Only the error sound works.
• ON
Both the confirmation and error sounds work.
OFF, Limited, ON
Metric/Inch switch
Specify the unit of measure displayed on the touch panel for length and paper size.
mm, inch
Start up display
Specify the screen displayed when the power is turned on or after auto reset is activated.
When [Login setting] has been set to [Required] to enter any mode, the start up
display is set to the mode screen.
Mode screen,
Printer mode, Copy mode, Scanner
mode
Print Admin settings
Prints a list of set values for the administrator settings.
Load A4-size (LTR-size) paper in the standard tray.
Follow the displayed messages for
operations.
Setting/Description Set value/Details