Pitney Bowes RISO ComColor Printer - Manual (Page 21)

19
Administrator Settings
ComColor Series Administrator’s Guide 02
IPsec setting (Ext. Ctrl.) (only the touch panel when the
ComColorExpress IS1000C or IS950C is connected)
You can use data encryption technology to prevent data leaks and fabrication when
connecting this machine and an external controller to a network. The setting items vary
depending on what network you use.
● Do not turn off the external CI controller while configuring a network. Configure
more detailed network settings in the utility screen of the external controller.
● If the external controller is connected, configure [IPsec setting] in addition to
this setting. The [IPsec setting] protects data if you print without using the
external controller.
• OFF, ON
• Reject unregistered packets
Not limited, Limited
• Security policy name
0 to 10 (You can add, change, delete
and prioritize)
• Security policy
Configure [Basic].
• Name
• Pre-shared key
• Setting by:
• Security policy scope
Not limited, Limited
• Apply to:
• Prefix length (only IPv6)
Configure [IKE].
• IKE
• Encryption algorithm
• Hash algorithm
• DH group
Configure [Comm.].
• Connection lifetime
• Authentication algorithm
• Encryption algorithm
• Hash algorithm
• PFS
• DH group
See "IPsec Setting" (p. 36) for how to
operate it.
Finished job setting
Specify whether to save the finished job to the [Finished] screen in printer mode. When
saving the finished job, set the save period and whether to prohibit or permit reprinting.
If reprinting is set to [Prohibited], the [Print] option is not displayed on the [Finished]
screen.
• OFF, Save
• by hour(s), by day(s), Saved jobs
(Select one.)
1 - 99
(Factory setting: by day(s) 1)
• Reprinting permission
Prohibited, Permitted
Waiting job setting
Specify whether to automatically delete the waiting jobs on the [Waiting] screen in printer
mode at a fixed period. Automatically clears the list at a set save period. Also sets whether
to make all jobs received from computers waiting jobs.
• Manual delete, Auto delete
• by minute(s), by hour(s), by day(s)
(Select one.) 1-99 (Factory setting: by
hour(s) 1)
• Do you place all jobs received from PC
in the waiting job list?
No, Yes
Printable area
This machine cannot print on some areas around the edges of the paper (margins)
regardless of the original size. Use this to set the size of the margins. Normally, use
[Standard].
ComColor 9150/9150R/9110/9110R/7150/7150R/7110/7110R
• [Standard]
Margins of 3 mm (1/8") on the top, bottom, left, and right sides
• [Maximum]
Margins of 1 mm (0.04") on the top, bottom, left, and right sides
ComColor 3150/3150R/3110/3110R
• [Standard]
Margins of 5 mm (3/16") on the top, bottom, left, and right sides
• [Maximum]
Margins of 3 mm (1/8") on the top, bottom, left, and right sides
When this has been set to [Maximum], the inside of the printer (transfer path) may
become soiled with ink depending on the original.
As a result, the edges or back of the paper may become soiled.
Standard, Maximum
Setting/Description Set value/Details