Hanna Instruments HI 98280 - Manual (Page 50)

50
Chapter 7 - GLP DATA
GLP (Good Laboratory Practice) is a set of functions that allows to store or recall
data regarding the probe calibration. This feature also allows to associate a
reading to “certified data” (standard solutions, reference meters, etc.) through
the calibration procedure.
To visualize GLP data, from measurement mode
press the
Note Note Note Note Note When no calibration data are available
for the selected parameter, the display
shows the message “No GLP data avail-
able for this measurement”. Press
to return to the previous screen.
7.1 PROBE INFORMATION
• To view the probe information, select the “Probe
information” option and press .
• The following data appear: model, firmware ver-
sion, ID and serial number.
• Press to return to the previous screen
or to change the ID code.
• If is pressed, a text box appears.
Insert the desired code, then press to
confirm or ESC to escape without saving the
modification.
• The messages “Storing data on probe, please
wait...” and “Data successfully stored on probe”
appear.
• Press to return to the “Probe informa-
tion” screen.
Note Note Note Note Note If no probe is connected a warning mes-
sage appears.