Hanna Instruments HI 98280 - Manual (Page 41)

41
Press to view the GPS coordinates of the
selected location; latitude and longitude. Press
to cancel the selected location.
Note Note Note Note Note If the location is associated to an exist-
ing lot, the meter will not allow to can-
cel it. To delete the location, first down-
load the lot data to the PC using the
HI929828 software, then erase the lot
from the meter memory.
Press to add a new location to the exist-
ing list, then choose one of the two proposed
options: “Current position to location” or “Add
location manually”.
In the first case the meter asks to enter the loca-
tion ID only, while for manual addition also the
latitude and longitude information has to be en-
tered.
The meter can store up to 50 locations.
Nearby locations
This option allows to view the nearby locations,
listed from the nearest to the farthest one. For
each location the distance from the current posi-
tion is also indicated.
This list is not available if the GPS unit is off or
GPS signal is not available.
The nearby locations include up to 20 locations within a distance of 30 meters
or the first 10 available locations.
Locations at a distance greater than 1000 km (or 1000 miles) are not included
among the nearby locations.
Press to view the GPS coordinates of the selected location; latitude and
longitude. Press to cancel the selected location.
Note Note Note Note Note If the location is associated to an existing lot, the meter will not allow to
cancel it. To delete the location, first download the lot data to the PC
using the HI929828 software, then erase the lot from the meter memory.