Hanna Instruments HI 98280 - Manual (Page 23)

23
Note Note Note Note Note A maximum of 12 measurements can
be displayed simultaneously. A warning
message appears if trying to enable
more than 12 measurements.
GPS data (only for model with GPS)
GPS data can be customized to meet specific requirements.
The user can select the format of GPS coordi-
nates among the following options: xx°xx’xx.x”;
xx°xx.xxx’; xx.xxxxx°. This format will be used to
show GPS coordinates in any screen where they
appear (even if the “GPS data” option is disabled).
3.2 SYSTEM SETUP
• From measurement mode, press
arrow keys and then press .
• Highlight the desired parameter using the arrow keys, then press .
Note Note Note Note Note If the password protection is enabled, the meter will ask to insert the
password prior to change the first parameter.
Date
Select the desired date format by pressing repeat-
edly the softkey.
Available formats are DD/MM/YYYY, YYYY-MM-
DD and MM/DD/YYYY. Use the keyboard to in-
sert the date and press to confirm.
Time
Select the desired time format by pressing repeatedly the softkey.
Available formats are hh:mm:ss (24 hours) and hh:mm:ss (12 hours).
Use the keyboard to insert the time and press to confirm.
To choose AM or PM, press A or P on the keyboard after inserting the time.