Hanna Instruments HI 98280 User Manual

Page 46

Use the arrow keys to change the sample number in the selected lot. The sample
number is shown on the bottom right corner of the display.

Note

Details are available only for the enabled parameters (see section 3.1
“Measurement Setup”).

• Press to see the sample number, time

& date, remark, location (only for model with
GPS) and tag ID or serial number (if available).

• Press to return to the previous screen

or to select a different sample in the
same lot.
When is pressed, a text box appears
to insert the desired sample number.

• Press ESC to return to the “View, Plot, Delete”

menu.

Plot
• Choose “Plot” and the list of the available pa-

rameters for the selected lot will appear.

• Use the arrow keys to select the desired param-

eter. Press to view the graph.

• Use the arrow keys to move the cursor in the

graph and highlight a sample. The sample data
are displayed below the graph.

• Press ESC to return to the parameter list.
• Press ESC again to return to the “View, Plot,

Delete” menu.

Note

The number of lot samples that can be plotted is limited by the display
resolution. To view a complete graph download data to PC.

Delete
• Choose “Delete” and the meter will display the

message “The selected lot will be erased! Con-
tinue?”. Press to delete or to re-
turn to the previous screen.

• To return to the “Log data” menu, press ESC

repeatedly.