Hanna Instruments HI 98280 - Manual (Page 48)

48
The display shows the message “Touch the tag with the tag reader”. Touch the
tag with the tag reader located on the top of the meter.
• When the tag is detected the meter displays the tag serial number and ID (if
available).
• Press the softkey (available only if the tag has never been identify) to
insert the current tag ID.
• Press to change the tag information or to close the window.
S/N ID
This option allows to view the ID code associ-
ated to a tag serial number.
• Select “S/N ID” and press .
• Insert the serial number using the meter key-
board and then press .
• The tag information window will appear. Press to return to the previous
screen or to modify the tag ID.
Note Note Note Note Note If the typed S/N is not stored in the memory, the warning message “This
tag S/N is not stored in memory” advises the user.
ID S/N
This option allows to view the tag serial number related to an ID.
• Select “ID S/N” and press .
• Insert the identification code using the meter
keyboard and then press .
• The tag information window will appear. Press
to return to the previous screen or
to modify the tag ID.
Note Note Note Note Note If the inserted ID is not present in the
memory, a warning message advises
the user.
Add tag manually
An ID code can be associated to a tag even if the tag is not physically available.
• Select the proper option and press .
• Insert the tag serial number using the meter keyboard and then press .
• Insert an ID code for the added tag and then press .
• The meter will now display all information just entered.