Generalmusic wk1or - Manual (Page 91)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
84 Owner’s Manual
Selecting Sound banks via MIDI ( Bk 1, 2, 3, 5, 6 )
CC 00 - vv (vv=value of the bank)
PC 1 -128
The WK1Or banks that can be selected via MIDI (Bank Select - CC 00 + value of the bank) to
command a Sound change are the following ones: Bk 1, 2, 3, relative to GMX (standard Generalmusic)
sound map, Bk 5, used to recall SAMPLES (1-a 8) and Bk 6, extension of WK1 Orsound map ( 00-
59 + 1 Effects Kit: location 112). Furthermore, there are other sound banks that are not available to
the user for selection, but necessary to WK1Or internal structure to guarantee compatibility with
other Generalmusic instruments.
Additional MIDI parameters
WK1 Or offers additionale MIDI paramters which add versatility to the instrument. The parameters
can be recalled from MIDI/GENERAL mode:
• General MIDI ON/OFF
• Channel Lock
More details are explained in the “MIDI/GENERAL” chapter of the Owner’s Manual.
Generalmusic System Exclusive
Via MIDI, WK1Or recognizes Generalmusic System Exclusive messages that control the values of
various features, such as: effects, master tune, master transpose. The system exclusive strings for
each requested parameters are listed below:
REVERB CHANGE
F0,2F,30,01,00,00,00,13,00,vv,F7 (vv= effect number 00h-15h)
REVERB LEVEL
F0,2F,30,01,00,00,00,13,01,vv,F7 (vv= reverb volume 00h-7Fh)
Note: The reverb volume selected by the instrument panel must be set to its maximum range (127)
REVERB TIME
F0,2F,30,01,00,00,00,13,02,vv,F7 (vv= reverb time 00h-7Fh)
CHORUS CHANGE
F0,2F,30,01,00,00,00,13,05,vv,F7 (vv= effect number 00h-15h)
CHORUS LEVEL
F0,2F,30,01,00,00,00,13,06,vv,F7 (vv= effect volume 00h-7Fh)
CHORUS RATE
F0,2F,30,01,00,00,00,13,07,vv,F7 (vv= value effect rate 00h-7Fh)
CHORUS DEPTH
F0,2F,30,01,00,00,00,13,08,vv,F7 (vv= value effect depth 00h-7Fh)
MASTER TUNE
F0,2F,30,01,00,00,00,07,00,vv,F7 (vv= central value 40h + / - 40h )
MASTER TRANSPOSE
F0,2F,30,01,00,00,00,09,02,vv,F7 (vv= central value 18h + / - 18 h semitones)
WARNING: All the numbers within the SysEx strings must be expresed as “HEXADECIMAL”
codes. SysEx messages do not require a specific MIDI channel.