Generalmusic wk1or - Manual (Page 68)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User Styles 61
9 • Programmable Styles (User)
WK1 Or sequencer memory can store up to 7 programmable User Styles
(96 - 103) which can either be loaded from disk or programmed by the
user. An extensive User Style library, available on Generalmusic Floppy
Disks, offers a large selection of User Styles to choose from. Styles can
be created according to two methods. The easier of the two consists in
modifying existing Styles. The second method, which may be more complex
but is sure more interesting, is programming Styles from scratch, creating
every single part of the Style (Drums, Bass, Acc.1, Acc.2, Acc.3, Variation,
Intro, Fill e Ending).
Use the MODE, COPY, CLEAR, and QUANTIZE to program a Style (these
keys are more frequently used in Style Playback mode, as Fills, Tap Tempo
and Fade functions).
Follow the steps below to program your own Style.
Recording a User Style
A. Setting the User Style parameters
The available options to record a new Style are described in the
following example.
Selecting an empty User Style location
1 . Make sure that the STYLE led in the numeric keypad is ON.
2 . Digit the number of one of the User Style locations (96-103).
Location 96 is selected in this example. The display will show the selected
location number (“User01”). The number changes with each Style selected
(01=96, 02=97, etc.).
3 . Press and hold the REC key in the Sequencer section for at least 2
seconds to switch to Record mode.
WK1 Or directly sets to User Style recording mode. The Drums track
(U01:DRM:Maj>) is ready to record the “Major” Riff. The relative Program
Change number in the Drums track starts blinking in the display.
If you play on the connected keyboard, you will hear a drum sound with
each note you play.
LOVER
MEMORY
ARRANGE
ON/OFF