Generalmusic wk1or - Manual (Page 32)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sound and Performances 25
Selecting a Performance
If you are not satisfied by recalling a single Sound and wish to change the
entire keyboard sound combinaton (including a Style, as described in detail in
the “STYLE” chapter), you can select a Performance.
To recall a Performance, proceed as follows:
1. Press the PERFORMANCE RECALL key to have access to Performance
mode, the arrowhead moves to Performance.
2. Use the function keys (F1…F9) located below the display to recall one of
the 9 Performances of the first group (WK1 default setting is group 1);
3. Use the PAGE keys or the + and - keys in the numeric keypad to have
access to the 7 groups of 9 Performances each.
The letter “P” and the relative group number appears in the display, along
with the name of the single Performance selected. TEMPO/DATA keys can
be used to control Tempo in Performance mode.
STYLE LOCK
Since a Style is associated to a Performance, by recalling a Performance you
will also recall the Style assigned to it.
If you prefer not to recall Styles automatically, you can enable STYLE LOCK
function: the accompaniment will remain unchanged with all Performances.
How to programme a Performance
WK1 oriental contains 63 user-programmable Performances that you can
modify according to your needs.
Performance programming operations are quite simple. By programming a
performance you will always recall your favourite Sound combinations, Styles
and panel settings.
Follow the steps given below to modify a Performance. It is important to
remember that the instrument MUST NOT be set to PERF mode - the left
arrowhead of the display MUST NOT indicate the PERF menu function.
a) Assign Sounds to the tracks.
Select a track with the corresponding function button (F1…F9) under the
display, and recall a Sound using the procedure already described. Use the
TEMPO/DATA keys to control the track volume.
b) Change the ON/OFF status in Real Time keyboard tracks.
Turn the UPPER 1,UPPER 2, e LOWER on or off.
c) Change the ON/OFF status of the accompaniment tracks (Drum,
Bass, Acc1, Acc2, Acc3).
Press the corresponding function button repeatedly to obtain the OFF status.
It is not possible to change the ON/OFF status of the Real Time keyboard
tracks with the corresponding function buttons (F7…F9) - see point 2 above.
The ON/OFF status of a track can be seen at a glance by the corresponding
name (for example ‘Drum’) which appears if ON or cancels if OFF.