Generalmusic wk1or - Manual (Page 25)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
18 Owner’s Manual
WK1 Or
MIDI OUT
EXPANDER
MIDI IN
MK
MIDI OUT
WK1Or
MIDI IN
MK
MIDI OUT
MIDI IN
WK1 Or
MIDI IN
MIDI OUT
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
WARNING - Turn down the volume of the
external amplification system before connecting
audio cables. Inserting jacks into the connectors
can cause unpleasant noise which may damage
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
the speakers of the amplification system
Connections
This section gives a brief explaination of the rear panel sockets and of the
the types of connection possible for your WK1 oriental.
POWER
Connects WK1 Oriental to a mains socket through the provided AC/DC
power supply adapter.
AUX/OUTPUTS
The rear-panel Stereo output jacks allows the WK1 oriental to be connected
to an external amplification system (keyboard amplifier, domestic stereo
system, mixing console, etc.). The signal is processed by the instrument’s
internal digital effects processor.
For stereo reproduction, connect two jack cables to the AUXOUT. To exclude
the instrument’s internal amplification and use the audio outputs only, insert
a jack into the headphones socket. Connecting the AUXOUTjacks to external
amplification equipment does not exclude the internal speakers.
MIDI
WK1 Or is fitted with a standard MIDI interface consisting of a MIDI IN and
a MIDI OUT port for MIDI connections. Detailed information regarding
MIDI applications are found in the dedicated chapter further ahead.
Below follow brief instructions on the principal MIDI connections possible.
• WK1 Or controlling another instrument.
Connect the WK1 Or MIDI OUT to the MIDI IN of the other instrument.
• WK1 Or controlled by a master keyboard.
Connect the WK1 Or MIDI IN to the MIDI OUT of the master keyboard.
If you wish the master keyboard to simulate WK1 Or fully, set it to transmit
on the same channel as the WK1 Or Common Channel, setting all
other channels to off.
• Recording Songs on a computer or external sequencer.
Connect the WK1 Or MIDI IN to the MIDI OUT of the external device,
the WK1 Or MIDI OUT to the MIDI IN of the external device. In MIDI/
GENERAL mode scroll with the PAGE keys to the page where LOCAL
is shown. Enable “Local OFF” function in the UPPER 1 keyboard section,
but do not disable the track. In this way the keyboard is separated from
the sound generation and WK1 Or sends keyboard data to its own
internal sound engine via the computer/sequencer.