Generalmusic wk1or - Manual (Page 62)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Songs 55
A) How to deactivate one of the tracks engaged in the Sequencer
1. Select a Song and press PLAY/STOP to start playing.
Check how many tracks are engaged in the sequencer.
2. Press one of the Function keys that correspond to a track
currently working.
The volume bargraphs will start blinking, indicating that the track is
now active.
NOTE: When the volume of a track is set to MIN, the display will
always show one Volume bar.
3. Press again the Function key corresponding to the active
track.
The number relative to the sound of the selected track is turned off.
The track stops playing.
4. Press the same key once again.
The track indication starts blinking. The relative track is no longer
engaged by the sequencer: it is now active to play in Real Time
during the Song.
5. Play on the keyboard.
The sound that was assigned to the sequencer track comes now
directly from the keyboard. Now you can play in Real Time during
the Song.
6. Press the same key once again.
The track indication is turned on steadily: it has now been reassigned
to the Sequencer and can play the notes recorded in the Song.
B) How to activate one of the tracks not engaged by the Song.
1. Press twice one of the function keys relative to a non active
track.
The track starts blinking.
2. Play on the keyboard.
The sound currently assigned to the active track is now playing.
3. Press the same key once again.
The track is turned off and is no longer active.