Generalmusic wk1or - Manual (Page 63)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
56 Owner’s Manual
Displaying Lyrics
If your Song or MIDI File contain the Lyrics track (the text of the song),
you can have them displayed both to on an external monitor, and to
WK1 Or display. In this way you will be ready to sing in Karoke style.
If you wish to do so on the display, proceed as follows:
- Select the MIDI file and press the START/STOP key to start the
playback;
- Press the LYRICS key to enable Karaoke function (led ON);
The display will show the lyrics in the first two rows.
If you wish the Lyrics to be displayed by o an external monitor, or by a
domestic TV set, follow the instructions below very carefully:
1. Connect the RGB or S-VHS cable (optional), to the TV set or to
the monitor.
WK1 Or is default set to communicate with video devices which
comply with the European PAL Standard. To communicate with
American NTSC standard, it is necessary to set the “ Video Select
Mode ” in the MIDI/GENERAL mode to NTSC . If your TV-set features
a S-VHS connection, it is best to use the S-VHS connector provided
with WK1 Or . Refer to the “MIDI/GENERAL” chapter, or to the
“Connections” paragraph in Chapter 2 for better details.
2. Scroll to page 3 in the MIDI/GENERAL section and set the “TEXT
LYRICS” function to ON using the TEMPO/DATA keys.
3. Turn the TV to the AV channel.
Refer to the instruction booklet of your TV set to select AV channel.
If you are using an external monitor, it should normally be set to AV
channel.
4. Select the desired Song (da 111 a 117).
5. Press the PLAY/STOP key to start the selected Song.