Generalmusic wk1or - Manual (Page 15)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8 Owner’s Manual
• 1 Get Started
In this chapter you will find step by step instructions on the basic functions
that will help you understand and get to know your instrument straightaway.
Powering up and preliminary operations
Power On/Off
The switch to turn the keyboard on and off is located on the left lateral panel.
To power WK1 oriental up insert the power supply cable in the rear-
panel mains socket, and plug the cable into a 220V wall socket.
Play on the keyboard and change the sounds
1. Play on the keyboard .
The “Kanoun” sound is heard over the whole keyboard extension.
The group of Keyboard activator keys (Upper 2, Upper 1, Lower) shows
that UPPER 1 is active: the led is ON. The UPPER 1 section of the
keyboard is now playing.
You can also enable the Upper 2 e Lower sections of the keyboard.
2. Press UPPER 2 and play on the keyboard .
A second sound is now heard, layered with the first.
Each note played on the keyboard plays two sounds simultaneously.
3. Press LOWER and play on the keyboard with both hands.
A third sound is introduced. The keyboard is now divided in two parts,
with a Split point on B3 note The LOWER keyboard section plays in the
C2 - B3 area. UPPER 1 and UPPER 2 sections play in the C4 - C7 area.
4. Adjust the overall volume.
Use the VOLUME dial to adjust the overall volume of the instrument.
Two thirds of the maximum range of the dial is recommended.
<--------------------- Kanoun --------------------->
<--------------------- Strings2 -------------------->
<--------------------- Kanoun --------------------->
<- HaloPad -><------------ Kanoun ------------>
<------------ Strings2 ----------->