Generalmusic wk1or - Manual (Page 28)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Basic Concepts 21
Data Entry
Modes, pages and values are selected as follows:
After selecting a function with the corresponding arrowhead, it is possible
to:
- change Page (where two or more pages are given) using the PAGE
keys,
- enter data (change parameter values) using the TEMPO/DATA keys.
For example: to assign a different Sound to a track, first select the track with
the corresponding function key (F1 … F9). The selected track starts blinkng
in the display track area, indicating that it is ready to accept modifications
(in this case, the PERF function must not be selected and the SINGLE
TOUCH PLAY function must be off).
Some panel keys, when held down for about 2 seconds, give direct access
to the edit panel of the selected function. These keys are:
STORE PERFORMANCE, STYLE/TEMPO LOCK, ARRANGE ON/OFF,
HARMONY, REV/CHO, RECORD (Sequencer mode).
Entering alphanumeric data
When you need to enter the name of a Performance, of a Song Style, or
during SAVE operations in Disk mode, WK1oriental keyboard operates
like a alphanumeric input peripheral. Each keyboard note corresponds to
a letter,a number or a symbol.
Up to 7 character names can be entered through the keyboard keys. (up
to 8 characters when working in FLOPPYDISK mode).
The table illustrates the position of the characters on the keyboard.
The leftmost notes are control keys:
• D2: CAPS - Toggles between Caps On / Caps Off (Capital
and small letters).
• D#2:INS/OVER - Insert / Overwrite. Insert adds a character
between two others, Overwrite, replaces existing cha-
racters. Overwrite is the default setting of the keyboard.
• E2: SPACE - a space is added
• F2: DELETE - deletes the selection or the successive cha-
racters.
• G2: <— (BACKSPACE) - deletes previous characters.
Move to the right or to the left using the + and – keys of the numeric
keypad respectively..
Press ESCAPE to exit.
Press and hold the STORE PERF key to record the new Performance
name. Press ENTER to confirm.
ENTER / ESCAPE
ENTER confirms an operation and the values assigned to the modified
parameter. In some function pages, Enter confirms a value and executes
an operation (e.g.: Load operation in Disk mode). Moreover, Enter can
also provide access to Disk and Midi modes.
ESCAPE cancels an operation or the values assigned to the
parameters.
I/O
SPACE
DELETE
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z , . ‘ -
1 2 3 4 5 6 7 8 9 0
CAPS