EXFO IQS-600 Integrated Qualification System - Manual (Page 97)

Setting Up Your Integrated Qualification System
Integrated Qualification System 89
Changing Unit and Module Identification
Changing Unit and Module Identification
Note: This feature is not available in Offline mode.
You can change the identification of your units and modules for easier
hardware management.
To change the identification for your unit or module:
1. Select the Utilities function tab, and then select the System tab.
2. Click Hardware Configuration.
IQS Manager prompts you to close all applications before changing the
hardware configuration. Click Yes to proceed.
3. Click the unit or module you want to configure (it will turn white to
indicate that it is selected).