EXFO IQS-600 Integrated Qualification System - Manual (Page 16)

Introducing the IQS-600 Integrated Qualification System
8 IQS-600
Understanding the LEDs
Understanding the LEDs
The LEDs on your Integrated Qualification System help you determine the
current status of your unit.
Alarm indicator LED
When lit on the controller unit, it
indicates a problem.
When lit on an expansion unit, the
latter is not linked to the
controller directly or through a
chain.
Lock LED
When lit, the unit is in
Lockout mode; you can
only disable this mode by
sending the
corresponding remote
command.
Interlock LED
When lit, it indicates that
the Interlock is open (no
current is passing
through) and that the
lasers in your unit are
deactivated.
On/Off LED
When lit, it indicates that
the unit is currently on.
Hard drive activity LED
When blinking, it indicates
current hard drive activity.
Remote LED
When lit, the unit is in Remote
mode and the local peripherals
such as the keyboard, selection
dial and mouse are disabled.
IQS-605P-HS