EXFO IQS-600 Integrated Qualification System - Manual (Page 56)

Getting Started with Your Integrated Qualification System
48 IQS-600
Exiting IQS Manager
Exiting IQS Manager
To exit IQS Manager:
1. Click the Exit button, located on the lower right-hand side of the main
window.
2. Select the appropriate option among the three choices below:

Exit IQS Manager: to close IQS Manager and return to Windows.

Log off Windows: to close IQS Manager and log off your Windows
session so another user may log on.

Turn off IQS: to completely shut down the IQS-600 controller unit.
3. Click OK to confirm your choice, or Cancel to return to IQS Manager.
Note: Expansion units are shut down manually by pressing on the On/Off button
located on the front lower left-hand part of each unit.
I
MPORTANT
Your platform was set up with the Windows power management
plan set to High Performance so that it does not enter the Sleep or
Hibernate modes. Do not change this power management plan, as
those modes are not compatible with IQS Manager.
I
MPORTANT
To ensure proper operation of your Integrated Qualification System,
follow this shut down procedure:

First, turn off your IQS-600 controller, and then

Turn off all expansion units.