EXFO IQS-600 Integrated Qualification System - Manual (Page 205)

Using IQS Products in an Automated Test Environment
Integrated Qualification System 197
Using the EXFO Getting Started Applications
The detail of this sub VI gives precious information on how to call an
instrument driver VI.
To use a Getting Started application:
1. Turn on the IQS controller unit, start IQS Manager, and ensure that all
the remote-control parameters are set correctly.
2. Open the desired Getting Started application and run it from LabVIEW.
3. From the application’s Front Panel, set the communication parameters.
For information on communication parameters, see Working with
EXFO LabVIEW Drivers on page 192.
4. Once the parameters are configured, click Initialize Communication.
5. Using the provided buttons and controls, perform the desired actions.
Instrument driver VI