EXFO IQS-600 Integrated Qualification System - Manual (Page 25)

Safety Information
Integrated Qualification System 17
Electrical Safety Information
The color coding used in the electric cable depends on the cable. New
plugs should meet the local safety requirements and include:

adequate load-carrying capacity

ground connection

cable clamp
W
ARNING

Use this unit indoors only.

Position the unit so that the air can circulate freely around it.

Do not remove unit covers during operation.

Operation of any electrical instrument around flammable gases
or fumes constitutes a major safety hazard.

To avoid electrical shock, do not operate the unit if any part of
the outer surface (covers, panels, etc.) is damaged.

Only authorized personnel should carry out adjustments,
maintenance or repair of opened units under voltage. A person
qualified in first aid must also be present. Do not replace any
components while the power cable is connected.

Capacitors inside the unit may be charged even if the unit has
been disconnected from its electrical supply.