EXFO IQS-600 Integrated Qualification System - Manual (Page 149)

Preparing for Automation
Integrated Qualification System 141
Changing Communication Settings

For TCP/IP
For information on communicating with TCP/IP over Telnet, see
the section pertaining to communication through TCP/IP over
Telnet.
6. Click Apply to confirm your changes.
7. To close the Communication Settings function tab, click Exit.
To revert to default general settings:
1. Click the Restore Default Settings button.
2. Click Apply to confirm your changes.
To revert to default GPIB settings:
1. Click the Default GPIB Settings button.
2. Click Apply to confirm your changes.
TCP/IP port 5024—used to
connect over Telnet.