EXFO IQS-600 Integrated Qualification System - Manual (Page 222)

Troubleshooting
214 IQS-600
Solving Common Problems
The controller unit does not
detect the IQS modules in
your expansion unit.

The expansion unit is
not turned on.

Turn on the expansion
unit.

The modules are not
properly inserted into
the expansion unit.

Ensure that the modules
are properly inserted into
the unit (remember to
turn off your unit first).

The IQS interface
cable is not properly
connected.

Ensure that the cable
linking your expansion
unit with the main unit is
properly connected.

Non-compatible
modules are inserted
into a high-speed
expansion unit
(bearing the “HS”
inscription on its front
panel).

Ensure that the modules
are compatible with
high-speed units. For a
complete list of
supported modules,
contact the technical
support team (see
Contacting the Technical
Support Group on
page 235).
The standard module
inserted into your high-speed
controller or expansion unit is
not detected.
The module is probably
not compatible with
high-speed units (bearing
the “HS” inscription on
their front panels).
Ensure that the module is
compatible with high-speed
units. For a complete list of
supported modules, contact
the technical support team
(see Contacting the Technical
Support Group on page 235).
Problem Probable Cause Recommended Action