EXFO IQS-3150 Variable Attenuator for IQS-500/600 - Manual (Page 45)

Setting Up Your Variable Attenuator
Variable Attenuator 39
Creating a Test Sequence
3. Under Starting Time, click the Relative or the Absolute button.
4. In the box below the buttons, enter one of the following value:
³
The amount of time you need between the moment you click the
Start button and the moment the sequence starts (Relative).
³
The time (in the next 24 hours) at which you want the sequence to
start (Absolute).
5. Under Sequence File, click Save As if you want to save that sequence.
I
MPORTANT
When using the Absolute start time mode, make sure that the clock
of your IQS Platforms is correctly set. The IQS-3150 dedicated
hardware uses that clock setting as time reference.