EXFO IQS-3150 Variable Attenuator for IQS-500/600 - Manual (Page 128)

SCPI Command Reference
122 IQS-3150
Product-Specific Commands—Description
:OUTPut[1..n]:DTOlerance?
Description This query returns the drift tolerance that is used
for power tracking via the ALC (Automatic
Leveling Control) loop.
At *RST, the value that will be set depends on the
instrument you have.
Syntax :OUTPut[1..n]:DTOlerance?[MAXimum|
MINimum|DEFault]
Parameter(s) Parameter 1:
The program data syntax for the first parameter is
defined as a
element. The allowed
DATA> elements for this parameter are:
MAXimum|MINimum|DEFault.
MINimum is used to retrieve the instrument's
lowest supported value.
MAXimum is used to retrieve the instrument's
highest supported value.
DEFault is used to retrieve the instrument's
default value.
Response Syntax