EXFO IQS-3150 Variable Attenuator for IQS-500/600 - Manual (Page 31)

Setting Up Your Variable Attenuator
Variable Attenuator 25
Basic Settings
3. According to the control mode used, select the correction factor as
follows:
³
For the Attenuation mode, under Attenuation Mode, click the
Correction Factor button, and enter the correction value in the
box next to it.
³
For the Output power mode, under Output Power Mode, enter the
correction value in the Correction Factor box.
4. Click Apply.
Self-adjusting module
Standard module