EXFO FastReporter Data Post-Processing Software - Manual (Page 98)

Working with PMD Files
92 FastReporter
Changing Fiber Length
Changing Fiber Length
If you are working with .pmd or .pmdb files, you can change the fiber
length to obtain more precision in your analysis.
To change the fiber length:
1. Open a PMD measurement file.
2. Select the measurement for which you want to change the fiber length.
You can select more than one using the Ctrl and Shift keys.
3. In the main window, select the Summary tab.
4. Locate the fiber length value under Test Settings and modify it as
needed.
Note: If your file is in .cdpmd format, the fiber length was measured
automatically during the measurement and cannot be edited.