EXFO FastReporter Data Post-Processing Software - Manual (Page 139)

Working with iOLM files
Data Post-Processing Software 133
Link View
Link Overview
The following color codes are used.
³
Red: If element is fail.
³
Green: If element is pass.
³
Blue: When the element is not tested for Pass/Fail.
The pass/fail status also depends on the threshold values specified.The link
overview representing all the elements discovered on the link is described
below.
³
Length of the measured link: Length of the measured link excluding
the launch and receive fiber. In other words, the fiber length between
point A and point B.
³
Selected Element: Rectangle representing the selected element.
³
Visible region: The colored background represent the visible region in
the Link Composition view.
³
Beginning of the link: Beginning of the link under test.
³
End of the link: End of the link under test.
Elements before A and after B are referred to as out of span elements.
Elements out of the span are not tested for pass/fail status, but can have
diagnostics on them. If the launch fiber is not defined, the element marked
as "A" will not be tested for pass/fail and if the receive fiber is not defined,
the element marked as "B" will not be tested for pass/fail.
Visible
Region
Beginning of
the link
Selected
Element
Length of the
measured link
End of the
Link