EXFO FastReporter Data Post-Processing Software - Manual (Page 183)

Using FastReporter Tools
Data Post-Processing Software 177
Using the Duplicated Measurements Tool
Using the Duplicated Measurements Tool
Sometimes, you might need to verify if tests were actually performed on
fibers and that the analysis or results were not just copied and pasted there
for speedy execution purposes. The duplicated measurements tool can
help you to quickly locate such files.
When you select at least two measurement files, you can have
FastReporter automatically compare them and indicate which files show
the same acquisition time, measurement wavelength and module serial
number. These files can then be selected automatically so you do not have
to look for them through your list, and batch processed.
Note: For FIP, the application will match the Fiber ID, Test Configuration name
and Test Date/Time of the measurement to mark the measurements as
duplicated.
Note: In the case of bidirectional OTDR files, both directions are analyzed
separately.