EXFO FastReporter Data Post-Processing Software - Manual (Page 102)

Working with OPM/PPM Measurements
96 FastReporter
Accepted File Formats
To change OPM/PPM settings:
1. Open the file which contains OPM/PPM measurements.
2. On the Results window, click the Thresholds tab.
3. Select a wavelength or wavelengths to modify using the Ctrl or Shift
keys.
4. Modify the thresholds associated with the wavelengths needed by
clicking in the desired threshold value and modifying it in the table. If
you have selected more than one wavelengths, all of them will be
modified at the same time.
Measurement:
OPM
Measurement:
PPM