Ditch Witch JT100AT - Manual (Page 30)

JT100/JT100 All Terrain Operator’s Manual
Controls - 29
Setup Console
CMW
©
2. Remote engine stop
switch To stop engine, press.
To restart engine, turn ignition
off and then back to start.
IMPORTANT:
• If this switch is used to stop
drilling unit, be sure to turn
ignition switch off if machine will
be left unattended for long
periods of time. Battery discharge
can occur.
• If wrenches are engaged when
remote stop is pressed, wrenches
will remain engaged but could
gradually open.
3. Auxiliary light switch To turn on, press
To turn off, press
4. Left rear stabilizer
control To lower, push.
To raise, pull.
Lower both rear stabilizers to the
ground together and then adjust
individually.
5. Right rear stabilizer
control To lower, push.
To raise, pull.
Lower both rear stabilizers to the
ground together and then adjust
individually.
Item Description Notes