Ditch Witch JT100AT User Manual
Page 218
JT100/JT100 All Terrain Operator’s
Manual
Service - 217
2000 Hour
CMW
©
Change Engine Coolant
Drain cooling system at drain (3) every two years
or 2000 hours. Add DEAC at fill (1) according to
instructions below until fluid level is visible in sight
glass (2).
To fill
1.
Remove fill cap (1) on expansion tank.
2.
Add coolant at expansion tank until fluid is visible in sight glass (2).
3.
Run engine with thermostat open (>195°F/90°C engine temperature) for 10 minutes.
4.
Stop engine and let cool.
5.
Add coolant at expansion tank until visible in sight glass.
6.
Install fill cap on expansion tank.
NOTICE:
•
The use of non-approved coolant may lead
to engine damage or premature engine
failure and will void engine warranty.
•
See “Approved Coolant” on page 190 for
list of approved coolants.