Ditch Witch JT100AT - Manual (Page 179)

Systems and Equipment - 178
JT100/JT100 All Terrain Operator’s Manual
Tier 4i Engine
CMW
©
Engine Display
The diagnostic gauge displays two types of codes:
For code explanations, see the following pages.
Active Codes
Active codes are displayed when active.
Stored Codes
1. Push menu button (1).
2. Scroll down to stored codes with right arrow button (3).
3. Push enter button (4).
To clear codes:
1. Hold down the diagnostic button and then turn ignition switch on.
2. Continue to hold down diagnostic button for 10 seconds until code clears.
Code type Display Definition
active (service) code SRVCCODE indicates an error that is occurring immediately
stored code STORCODE indicates an error that has occurred previously