Ditch Witch JT100AT - Manual (Page 211)

Service - 210
JT100/JT100 All Terrain Operator’s Manual
500 Hour
CMW
©
Loader/Driver
Check Swing Drive Gearbox Oil Level
Check oil level every 250 hours. Park unit on a
level surface and remove plug (shown). Oil
should be level with plug. Add MPL as needed.
500 Hour
Drilling Unit
Change Engine Oil and Filter
Change engine oil and filter every 500 hours
ONLY if using motor oil meeting Deutz
specifications DQCIII-LA. See page 185 for more
information about DEO specifications.
To change:
1. While oil is warm, remove drain plug (2).
Drain oil and replace plug.
2. Remove filter (3) and replace with new filter
each time oil is changed. Add DEO at fill (1).
Location Task Notes
DRILLING
UNIT Change engine oil and filter ONLY if using motor oil
meeting Deutz specifications
DQCIII-LA
LOADER/
DRIVER Change swing drive gearbox oil MPL
IMPORTANT: Use oil specified in temperature
chart found in “Recommended Lubricants/
Service Key” on page 188.