Ditch Witch JT100AT - Manual (Page 220)

JT100/JT100 All Terrain Operator’s Manual
Service - 219
As Needed
CMW
©
As Needed
Drilling Unit
Check SaverLok ™
Check SaverLok and replace as needed. See
your Ditch Witch
®
dealer for replacement parts.
To replace:
1. Remove nine bolts (1) from the flange, then
remove the flange(2) and SaverLok (3) from
connection.
2. Remove and replace o-ring (4), if necessary.
3. Reuse the flange to attach the SaverLok.
Install bolts and tighten in a crisscross pattern
to 225 ft•lb (305 N•m).
Location Task Notes
DRILLING
UNIT Replace SaverLok connection TJC
Check Diesel Particulate Filter (DPF)
Change air filter
Change drive belt
Drain fuel prefilter
Vent fuel system
Check JT fluid pump rotation speed
Check fluid pump ball valve
Check pipeloader inserts
Replace wrench jaw inserts and hardware
Change auto lubricator TJC pail
Adjust rubber track tension
Change AT inner water swivel (seal kit) THF
Check batteries
LOADER/
DRIVER Lube boom extensions MPG