Ditch Witch JT100AT - Manual (Page 205)

Service - 204
JT100/JT100 All Terrain Operator’s Manual
50 Hour
CMW
©
Check Compressor Belt
Check compressor belt (1) tension every 50
hours. Adjust tension of compressor belt as
shown.
Change Hydraulic Filters (Initial)
Remove break-in filters after 50 hours. Install
standard filters (p/n 153-792).
Change Remote Charge Filter
Change after 50 hours.
IMPORTANT: If hydraulic system must be
opened for repair, install new filters (p/n 153-
791) for first 25 hours of operation. If these
filters become plugged in fewer than 20 hours,
replace with clean filters. After 25 hours of
normal operation, replace with clean filters (p/n
153-792).