Welding, Washing, Welding washing – Ditch Witch JT100AT User Manual
Page 188
JT100/JT100 All Terrain Operator’s
Manual
Service - 187
Service Precautions
CMW
©
Welding
Washing
NOTICE: Welding can damage electronics.
•
Welding currents can damage electronic components. Always disconnect the ECU ground
connection from the frame, harness connections to the ECU, and other electronic components prior
to welding on machine or attachments. Connect welder ground close to welding point and make sure
no electronic components are in the ground path.
•
Disconnect battery at battery disconnect switch before welding to prevent damage to battery.
•
Do not turn off battery disconnect switch with engine running, or alternator and other electronic
devices may be damaged.
NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components
with water.