Ditch Witch JT100AT User Manual
Page 204

JT100/JT100 All Terrain Operator’s
Manual
Service - 203
50 Hour
CMW
©
Inspect Thrust Rollers
Inspect thrust rollers (shown) every 50 hours.
Clean or replace if they do not turn freely.
Check Anchor Driver Gearbox Oil
Level
Check oil level every 50 hours.
To check
Lay anchor driver on its side. Oil should be level
with plug (1). Add MPL at fill plug (2) as needed.
Check Drive Belt
Check belt tension every 50 hours. Check the
distance between the projection of the moving
tension arm and the contact with the fixed
tensioner housing. If distance (A) is less than 1/8”
(3 mm), change the V-rib belt. See “Change Drive
Belt” on page 221.
This manual is related to the following products: