Recommended lubricants/service key – Ditch Witch JT100AT User Manual
Page 189
Service - 188
JT100/JT100 All Terrain Operator’s
Manual
Recommended Lubricants/Service Key
CMW
©
Recommended Lubricants/Service Key
Item
Description
DEO
Diesel engine oil meeting or exceeding Deutz specification DQC III- LA.
NOTICE: Shipped from factory with API CJ-4 DEO meeting Deutz specification DQC II-
LA. Change oil initially at 250 hours.
•
Engine must use low sulfated ash, phosphorous, and sulfur (low SAPS) oil.
•
See viscosity chart.
•
If oils meeting only API CJ-4 or ACEA E6/E9 are used, service interval is reduced
to 250 hours.
NDO
High-performance, multi-function SAE 30 fluid meeting or exceeding Allison C4
specification, such as Phillips 66 Torque Fluid or Chevron Torque Fluid
MPG
Multipurpose grease. Use polyurea based NLGI GC-LB Grade 1.5 or lithium based
NLGI GC-LB Grade 2.
MPG
Pump seal grease, similar to 94050 Philube blue multipurpose
EPS
Extreme pressure spray lubricant, Lubriplate LO152-063 or equivalent
MPL
Multipurpose gear oil meeting API service classification GL-5 (SAE 80W90)
THF
Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 423, Chevron Tractor
Hydraulic Fluid, Texaco TDH Oil, or equivalent
TJC
Tool joint compound: Ditch Witch
®
standard (p/n 259-858) or
summer grade (p/n 256-031)
Check level of fluid or lubricant
Check
condition
Filter
Change, replace, adjust, service or test