Jt30 /jt30 all terrain operator’s manual – Ditch Witch JT30AT User Manual
Page 96
JT30 /JT30 All Terrain Operator’s Manual
Transport - 96
Load
CMW
Procedure
Loop a transport chain around each tie down point. See chart below for correct distances between tiedown
ends. Make sure tiedowns are tight before transporting.
NOTICE:
•
Wrenches can open after engine shutdown. Ensure that any downhole tool or pipe in wrenches is
attached to spindle or removed before transport.
•
Use Grade 7-3/8” (18.7 cm) transport chain to secure drilling unit.
Note: If hauling unit without pipe box, remove remaining pipe in drill frame chute.
Distance
U.S.
Metric
A
12-45” 31-114
cm
B
12-45” 31-114
cm
C
less than 55”
less than 140 cm
This manual is related to the following products: