Ditch Witch JT30AT - Manual (Page 41)

Controls - 41
JT30 /JT30 All Terrain Operator’s Manual
Right Control Console
CMW
Item Description Notes
1. Carriage control To move carriage forward,
push.
To move carriage backward,
pull.
To rotate spindle
counterclockwise (breakout),
move right.
To rotate spindle clockwise
(makeup), move left.
IMPORTANT: See “Operate Carriage
Control” on page 104 for more
information.
2. Drilling fluid quick fill
switch To override fluid control
setting for full pump flow,
press and hold.
To return fluid flow to flow
control setting, release.
IMPORTANT: Also overrides
temporary fluid shutdown when front
wrench is closed.
3. Remote engine stop
switch To stop engine, press.
To restart engine, press
remote engine start switch
(page 36).
IMPORTANT:
• If this switch is used to stop
drilling unit, be sure to turn
ignition switch off if machine will
be left unattended for long
periods of time. Battery discharge
can occur.
• If wrenches are engaged when
remote stop is pressed, wrenches
will remain engaged but could
gradually open.
4. Drilling fluid pump
switch To turn on, press once.
To turn off, press once.