Ditch Witch JT30AT - Manual (Page 205)

Service - 205
JT30 /JT30 All Terrain Operator’s Manual
Startup/10 Hour
CMW
Drilling Unit
Check Track Tension and Condition
Check track tension and condition before startup
and every 10 hours of operation and adjust or
replace as needed.
To Adjust:
1. Pump MPG into fitting (shown) until the length
of the compressed spring, dimension (A), is
12.75” (323.85 mm).
2. Drive straight forward one machine length and
check tension again.
Check Fuel Filter Water Separator
Check fuel filter water separators before startup
and every 10 hours of operation. Drain water at
plug (shown) as needed.