Adjust settings, Override, Disengage – Ditch Witch JT30AT User Manual
Page 165: Resume, Jt30 /jt30 all terrain operator’s manual, Adjust settings override
Systems and Equipment - 165
JT30 /JT30 All Terrain Operator’s Manual
Cruise Control
CMW
Adjust Settings
Override
•
To override thrust/pullback settings, move joystick out of neutral and beyond current setting. Unit will
increase to joystick setting.
•
To return to previous setting, release joystick.
Disengage
To disengage cruise control, move joystick out of neutral in opposite direction of carriage travel. “Cruise
ON” disappears from the Information Center display and carriage stops moving.
Resume
1.
Position joystick out of neutral in direction to be resumed (forward or
backward).
2.
Press resume. Thrust and rotation resume at the previous settings and “Cruise
ON” is shown on the Information Center.
Setting
Instructions
Thrust or Pullback
•
To increase thrust or pullback speed, set joystick in neutral position and
press resume.
•
To decrease thrust or pullback speed, set joystick in neutral position and
press set.
Rotation
•
To increase rotation speed, move joystick to left and press resume.
•
To decrease rotation speed, move joystick to left and press set.
Note: To obtain fine adjustments, press and hold the multi-use button while making the adjustment.
RESUME
/
SET
/
c00ic113h.eps