Dolphin Peripherals 9500 - Manual (Page 238)

14 - 4 Rev C Dolphin® 9500 Series User’s Guide
Charging Terminals in the ChargeBase
The Dolphin ChargeBase charges the main battery of each terminal in less than four hours. The ChargeBase uses the intelligent
battery charging system incorporated into all Dolphin terminals that prevents overcharging. This means that Dolphin terminals
may be stored in the ChargeBase indefinitely without damage to the terminals, battery packs, or the ChargeBase.
1. Power the ChargeBase; see Supplying Power to the ChargeBase on page 14-3.
2. Insert a terminal into a terminal well; see Inserting and Removing Terminals on page 14-3.
3. The Charge LED lights green to indicate that the terminal is powered and charging.
Mounting the ChargeBase
The Dolphin ChargeBase should be mounted to a dry, stable surface. When choosing a location, always bear in mind that
• The mounting location must allow users easy access to the power connector.
• The ChargeBase should be oriented so that users can easily read the labels.
Bottom Panel
The bottom panel of the Dolphin ChargeBase offers two mounting options: insert a DIN Rail for desk mounting or use mounting
brackets with the available screw slots for wall mounting.
DIN Rail Slot
Screw Slots
Rubber Feet