Dolphin Peripherals 9500 - Manual (Page 214)

12 - 2 Rev C Dolphin® 9500 Series User’s Guide
Dolphin HomeBase Parts and Functions
Front Panel
Terminal Well
Place the Dolphin terminal in this well to communicate with a host device, power the terminal, and charge its battery
pack. If the host device is a desktop computer that uses ActiveSync, synchronization begins immediately. While
seated in the terminal well, the main battery installed in the terminal charges. The HomeBase completely charges
a battery pack in less than four hours.
Auxiliary Battery Well
See Auxiliary Battery Well on page 12-3.
DOCK LED
Turns solid green when the Dolphin terminal is properly seated in the Dolphin HomeBase. When this light is on, the
terminal is connected to the base.
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well.
To see the auxiliary battery well, see Rear Panel on page 12-3.
For information about charging a battery in the auxiliary battery well, see page 12-5 .
COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host
device. The color of this LED differs if the HomeBase is using the serial or USB port connection.
This color means…
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.
Terminal Well
DOCK LED
Auxiliary Battery Well
AUX Battery LED
COMM LED