Dolphin Peripherals 9500 - Manual (Page 215)

Dolphin® 9500 Series User’s Guide Rev C 12 - 3
If using the serial port
If using the USB port
Rear Panel
Auxiliary Battery Well
The HomeBase enables you to charge an additional Li-ion battery pack independently of the terminal well. This
feature ensures that you can always have a fully-charged battery for your Dolphin terminal. See
Charging a Spare
Battery in the Auxiliary Battery Well on page 12-5.
USB Port
This USB Port is full-speed and 2.0 compliant. Using a USB cable, you can connect the HomeBase to a peripheral
device, such as a desktop computer or printer. When the Dolphin terminal is seated in the terminal well, it is
connected to the peripheral device via the HomeBase. The USB port on the HomeBase requires that you use
ActiveSync 3.7 or higher.
RS-232 Port
Use a 9-pin, RS-232 cable from Hand Held Products to connect this port to a peripheral device for RS-232 data
communication. For more information, see
HomeBase Serial Connector on page 12-4.
DC Power Jack
Use a power cable from Hand Held Products to supply power to this power jack. For more information, see Powering
the HomeBase on page 12-4.
This color means…
Red Serial data is being sent from the Host Device to the Dolphin HomeBase.
Green Serial data is being sent from the Dolphin HomeBase to the Host Device.
Orange Serial data is being sent at high data rates.
This color means…
Green LED A USB Connection is established with the host computer.
Auxiliary Battery Well
DC Power Jack RS-232 Port USB Port