ADLINK aTCA-N700 - Manual (Page 48)

aTCA-N700 SW Users Guide
４２
Figure 8-3 Broadcom device networking interfaces (RTM2)
8.1.1. Port Mapping
Bcm.user uses port names as described in Table 8-1 without an RTM, and Table 8-2
with an RTM. The front blade only configuration is according to
/usr/local/bcm/config.bcm.config. The configuration with an RTM is according to
/usr/local/bcm/config.bcm.rtm config.
Table 8-1 bcm.user port assignment with RTM1
Name
speed
(Mbps) Interface
Type Auto
nego Description
xe0 1000
10000
GMII
SFI off Front port 1
xe1 1000
10000
GMII
SFI off Front port 2
xe2 1000
10000
GMII
SFI off Front port 3
xe3 1000
10000
GMII
SFI off Front port 4
xe4 10000 XAUI off NP(TOP) Port 0
xe5 10000 XAUI off NP(TOP) Port 1
xe6 10000 RXAUI off NP(TOP) Port 2
xe7 10000 RXAUI off NP(TOP) Port 3
xe8 10000 XAUI off NP(BOT) Port 0
xe9 10000 XAUI off NP(BOT) Port 1
xe10 10000 RXAUI off NP(BOT) Port 2
xe11 10000 RXAUI off NP(BOT) Port 3
xe12 1000 GMII on FabricA