ADLINK aTCA-N700 - Manual (Page 43)

aTCA-N700 SW Users Guide
３７
Table 6-5 sdboot parameters
No
command Description
1 mmc dev Activate the mmc deivce.
2 fatload mmc0 0:1
$loadaddr uimage Load kernel image at mmc0 interface 0 device 1
partition.
3 fatload mmc0 0:1
$ramdiskaddr
rootfs.ext2.gz.uboot Load rootfile system at mmc0 interface 0 device 1
partition.
4 fatload mmc0 0:1
$fdtaddr aTCA-
N700.dtb Load dtb image at mmc0 interface 0 device 1
partition.
5 run normalargs Set Environment.
setenv bootargs root=/dev/ram rw
console=$consoledev,$baudrate root=/dev/ram rw
ramdisk_size=400000 post_res=$post_result
6 run bootrfs Execute Linux booting.
bootm $loadaddr $ramdiskaddr $fdtaddr